TM9-4120-400-14
[
]
LOW PRESSURE SWITCH S5. - continued
Figure 5-25. Low Pressure Switch S5
REPLACEMENT
1.
Tag and disconnect wire leads from low pressure switch (1).
2.
Disconnect flare nut (2) at end of capillary line from switch(1).
3.
Remove two screws (3) and lock washers (4) from switch (1).
4.
Carefully remove capillary line (5) through grommet (6) and remove switch (1).
5.
Insert capillary line (5) through grommet (6) hole in bulkhead.
6.
7.
Connect flare nut (2).
8.
Secure switch (1) with two screws (3) and lock washers (4).
--
Carefully route capillary line (5) and position so it will not touch junction box.
9.
5-67