TM 9-4120-407-14
(2) EMI Filter (FL2) Removal.
(a) Remove control panel support.
1 Loosen screw (1) Figure 3-38 and remove control panel assembly (2).
Figure 3-38. Control Panel Support
2 Remove four screws (3), flat washers (4), control panel support (5), and shim (6).
(b) Remove four screws (1) Figure 3-39, lock washers (2), and flat washers (3). Discard lock
washers.
(c) Carefully pull the box (4) away from air conditioner frame as far as wire leads (5) will allow.
(d) Remove four self locking nuts (6), screws (7), connector (8), and gasket (9). Discard self locking
nuts.
3-101