TM 9-4120-408-14
5-24. EVAPORATOR SINGLE ROW TERMINAL BOARD MAINTENANCE. (Continued)
Figure 5-20. Evaporator Single Row Terminal Board Maintenance
(3) Replace all damaged or defective components.
c.
Install .
(1) Position marker strip (6) and single row terminal board (5) in evaporator housing (7) and secure with two
screws (4), flat washers (3), new lock washer" (2), and nuts (1).
(2) Follow on maintenance:
(a)
Refer to paragraph 5-14 and replace dehydrator.
(b)
Refer to paragraph 5-29 and connect condensate level warning switch electrical leads.
(c)
Refer to paragraph 5-22 and connect wiring harness, A106J1, leads.
(d)
Refer to paragraph 5-20 and connect electrical leads.
(e)
Refer to paragraph 5-17 and install evaporator side panel.
5-58
