TM 9-4120-411-14
4.54 REAR RAIL REPLACEMENT.
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Mechanics Tool Kit
Item 1, Section III, Appendix B
a. Removal. See figure 4-53.
WARNING
Rotating parts and lethal voltage levels are used in operating the FDECU. Be sure
power source is disconnected. Injury or death can occur if connected to power
source.
(1)
Shutdown the FDECU per paragraph 2.4 and disconnect it from power source.
(2)
Remove access panel per paragraph 4.21.
(3)
Remove rear screen per paragraph 4.22.
(4)
Remove two screws (1).
(5)
Remove four screws (2) and rear rail (3).
Figure 4-53. Rear Rail.
b. Installation. See figure 4-53.
(1)
Remove two screws (1).
(2)
Install rear rail (3) and align mounting holes. Secure with four screws (2).
(3)
Install rear screen per paragraph 4.22.
(4)
Install access panel per paragraph 4.21.
(5)
Connect FDECU to power source and operate per paragraph 2.4.
4-124
