TM 94910-387-14-1
4-17. LH ACCUMULATOR ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
REMOVAL (cont)
CAUTION
Be careful when using slip joint pliers so no dam-
age to hoses occurs. Apply only enough pressure
to prevent hoses from slipping.
2
ACCUMULATOR ASSEMBLY (5). Pull forward so six hoses
(6) slide through plate (7).
3
SIX HOSES (6) WITH SIX MALE HOSE FITTINGS (8). Re-
move from accumulator assembly using 7/16-in. open end
wrench (4) and slip joint pliers (9).
4
ACCUMULATOR ASSEMBLY (5). Remove.
5
TWO SCREWS (10) AND TWO
WASHERS (11). Remove from pivot
block (12) using 7/16-in. open end
wrench (4).
6
PLATE (7) WITH ATTACHED PIVOT
BLOCK (12) AND SUPPORT BLOCK
(13). Remove.
4-54
