TM 9-4910-387-14-2
6-2.
TROUBLESHOOTING (cont)
D.
WIRES MAY BE OPEN. (cont)
checks performed in steps 8 thru 11 above, disassemble male
connector plug (21) (p 6-409) and check if wires are connected to
contacts.
a. Connect wires as necessary.
b. If wires are connected, replace the open wire (p 6-409).
14 If FUEL HEAT light does not light, proceed to step E.
E.
FEMALE AND/OR MALE CONNECTOR PLUGS MAY BE DEFECTIVE.
1 Disassemble female and male connector plugs
(1 and 2) (p 6-187 and 6-409).
2 Check for burnt or corroded terminals (3).
3 Replace female and/or male connector plugs (p
corroded.
6-54
