TM 9-4910-387-14-2
31 THREE WIRES (TAGGED X, Y, AND Z
NOTE
COMING FROM FUEL HEAT SWITCH
Wires and both female
AND FUEL HEAT INDICATOR LIGHT)
connector plugs were marked
AND GROUND WIRE. Pull through
flush motor base (70), connect to
at disassembly. Ensure that
female connector plug (71), and secure
wires connect to correct
by tightening four screws (72).
contact points
32 THREE WIRES (TAGGED X, Y, AND Z
COMING FROM LUBE HEAT SWITCH
AND LUBE HEAT INDICATOR LIGHT)
AND GROUND WIRE. Pull through
flush motor base (73), connect to
female connector plug (74), and secure
by tightening four screws (75).
33 TWO FLUSH MOTOR BASES (70 AND 73).
Position over two
female connector plugs (71 and 74).
34 FOUR SCREWS (76). Install.
6-215