LUBRICATION CHART
TESTER, ENGINE DISTRIBUTOR, BENCH-TYPE,
6, 12, AND
60 CYCLE, 115 VOLT
PRODUCTS COMPANY INC.)
(MODEL 168) (4910-392-2939)
Intervals are based on normal operations. Reduce to
Clean
oil
points
before
lubricating.
parts
with
THINNER,
for abnormal operation and severe conditions or con-
paint, mineral spirits (TPM) , or
SOLVENT, dry-cleaning
taminated lubricants. During inactive periods, intervals may
before lubricating. Dotted
points indicate
sides of the
extended
with
adequate
preservation.
LUBRICANT . INTERVAL
3042
s
A,
FIG.
I
3 or 4 d r o p s
(See note 1 )
s -------------------------------------
3042
B,
FIG,
3 or 4 d r o p s
(See note 1 )
--
KEY
--
.
INTERVAL
LUBRICANT
ALL TEMPERATURES
3042
s - Semi-annually
3042
general
purpose
L U B R I C A T I N G OIL,
NOTES:
1. VACUUM PUMP AND DRIVE MOTOR --
tester from case, wipe
points
and insert 3 or 4 drops
lubricating oil.
2. UNPAINTED FERROUS METAL SURFACES --
with an oiled cloth to preserve finish.
----
Lubrication
--
