shell sections (sheet metal) not supported by
ternator (par. 95c and d). Refer to referenced
paragraphs above, and figures 22, 23, 24, 25,
stator or flange iron to prevent crushing the
26, and 27, which illustrate the different type
sheet steel alternator shell.
mounting arrangements and other information
for setting-up the several kinds of starters for
testing. Refer to paragraphs 133 and 134 for
Testing Arrangements
test procedures and further information on
Mounting of starters (cranking motor) is
s t a r t e r s . The equipment illustrated on the
done in a similar manner as the method used
above figures for performing these tests is
listed and illustrated in appendix II.
for mounting a pulley driven generator or al-
42
