TM 9-4910-714-14&P
OPERATION
FUNCTION. The Engine Transport Stand is designed to accommodate various size
2-1.
a i r c r a f t engines by means of adjustable support assemblies.
WARNING
THE TRANSPORT STAND BREAKING MECHANISM MUST BE FULLY ENGAGED PRIOR TO
LOADING OR UNLOADING ENGINE. FAILURE TO DO SO MAY RESULT IN SERIOUS IN-
JURY AND EQUIPMENT DAMAGE.
BREAKING MECHANISM. Prior to loading or unloading, the breaking mechanism at
2-2.
the Transport Stand must be set using a box wrench.
T h e locking screw is turned clockwise until the foot is fully seated on the
f l o o r surface.
T e s t stability of the Transport Stand by applying pressure
on the Transport Stand handle in both a forward and backward direction.
The four support assemblies may be adjusted to receive
2-3. SUPPORT ASSEMBLIES.
Loosen the hex head screw and position the support
v a r i o u s size engines.
assembly along the slot in the longitudinal frame member of the stand or
along the axis of the slot in the base member of the support assembly.
After
t h e proper location has been achieved, tighten the mounting screw securely.
TRANSPORTATION. Prior to movement of the Transport Stand with engine mounted,
2-4.
turn the locking screw counterclockwise to retract the brake mechanism.
TROUBLESHOOTING
T r o u b l e s h o o t i n g instructions are not required due to the basically simple
3-1.
d e s i g n utilized.
