TM 5-2420-230-10
c. Inflate Tire.
Never lean, stand, or reach over a wheel/tire assembly during inflation or deflation.
Never put hands or fingers near rim flanges or bead seats when inflating or deflating tires.
Never reinflate a tire that has been run flat or seriously underinflated without first removing and
checking for tire or rim damage.
(1)
Remove tire gauge and hose assembly and tire valve adapter from stowage box.
(2)
Remove protective cap from quick-release connector on auxiliary air tank and connect tire gauge and hose
assembly to it.
(3)
With engine running, and air pressure at normal operating pressure, remove dust cap from tire valve, fit tire valve
adapter to valve, and attach tire gauge and hose assembly to it.
(4)
Operate inflation lever on tire gauge and hose assembly until desired pressure is indicated on pressure gauge.
(5)
Remove tire gauge and hose assembly from tire valve adapter, remove adapter from valve and install dust cap.
(6)
Remove tire gauge and hose assembly from auxiliary air tank, replace protective cap, and put tire gauge and hose
assembly and tire valve adapter in stowage box.
d. Follow-On Maintenance.
Remove "Do Not Operate" tag from ignition switch.
END OF TASK
Change 1
