TM 5-2420-230-10
3-21. FUEL/WATER SEPARATOR SERVICE.
This Task Covers:
a. Servicing
b. Follow-On Maintenance
INITIAL SETUP
References
Test Equipment
None
None
Equipment Conditions
Tools and Special Tools
TM or Para
Condition Description
Vehicle prepared for servicing (Do
not install FEL maintenance arm).
Materials/Parts
Hood opened.
Drawings Required
Personnel Required
None
MOS 21J, Construction Engineering Operator
Estimated Time to Complete
6 min.
a. Servicing.
No smoking, flames, sparks, or glowing or hot
objects allowed within 50 ft. (15 m) of vehicle. Fire
or explosion may cause personal injury or death.
Do not work on fuel system when engine is hot; fuel
can be ignited by a hot engine.
Keep a fire extinguisher within easy reach when
working with fuel or on a fuel system.
NOTE
If excessive water and/or debris is present in sediment
bowl, notify Unit maintenance.
(1)
Empty water from sediment bowl (1) into suitable,
clean container by opening drain (2) using pliers. Using
a clean rag, wipe up any spills.
(2)
Close drain (2) using pliers.
b. Follow-On Maintenance.
(1)
(2)
Remove "Do Not Operate" tag from ignition switch.
END OF TASK
Change 1