TM 9-1345-203-12
(a) Have two-person recovery team
5. Remove the safety clip from the
proceed slowly and carefully to a
setting knob and, using wrench
point 2 yards below where mine was
M22, arm the fuse by moving
emplaced.
the knob from S to A clockwise.
(b) Carefully probe for mine.
6. To
avoid
sympathetic
(c) Remove any foreign material from
detonation,
locate
all
its top and, with wrench M22,
subsequently emplaced mines
disarm the mine by turning the
in accordance with paragraph
setting knob counterclockwise to S
f(1)(a).
position. Insert safety clip.
(3) Recovery of Amphibiously Emplaced
(d) Carry the mine to shore.
Mines.
(e) Remove fuze from mine by turning
with wrench counterclockwise to
WARNING
loosen fuze and, then, grasping the
MINES
MAY
HAVE
DRIFTED
fuze with the fingers, lift out of the
DOWNSTREAM AND/OR CONTAIN
fuze well.
ANTIPERSONNEL
OR
ANTI-
(f) Turn fuze bottom up and remove
HANDLING DEVICES. REMOVAL BY
detonator from detonator well.
METHODS OTHER THAN EXPLOSIVE
(g) Replace white plastic shipping plug
BREACHING (TM 91375-21312) IS
in detonator well.
EXTREMELY HAZARDOUS AND IS
NOT RECOMMENDED.
IF THE
SITUATION
DEMANDS
SUCH
RECOVERY,
PROCEED
WITH
UTMOST CAUTION.
