TM 9-1345-203-12
e. Arming.
(1) Lay out attached discriminator wire
loosely at side of road near discriminator
to obtain connector for attachment to
NOTE
firing device.
Proceed as follows for arming after
(2) Assure ARM-SAFE toggle switch is in
completion of paragraphs b and c
safe position. Remove dust cover from
above.
firing
device
connector
labeled
DETECTOR and connect to discriminator
wire (fig. 2-63).
(4) If indicator light does not glow, do not use
(3) Standing on two printed marks on
system.
discriminator nearest firing device, test
(5) If system is operable, temporarily
circuitry for completion of electrical
disconnect discriminator wire from firing
contact. Watch indicator light.
device.
(6) Carefully remove launcher from dispenser
NOTE
pouch and place in selected position.
System is operable only if indicator
(Launcher will operate most effectively at
light glows.
about 90 angle from target road or path
at between 3-30 meters (10 to 100 feet))
