TM 9-1345-203-12
depressed position by launcher tube (fig.
f. Emplacement in Earth, Sand, or Other Loose
Material.
(6) Continue to push rocket through launcher
(1) In soft earth, loose sand, etc., scoop up
until contact ring s exposed at aft end.
mound approximately 2 feet in diameter
Assure that grounding clip is connected to
to height of 6 to 8 inches (fig. 2-66).
aluminum grounding ring on rocket (fig. 2-
(2) Remove circular wooden blocks from
69).
launcher end.
(7) Remove shorting clip from copper ring by
(3) Supporting head of rocket, firmly push
pulling cord of tagged shorting clip and
rocket slowly forward until safety band is
push rocket back into launcher.
exposed (fig. 2-67).
(4) Remove safety band.
(5) Depress ejection pin and push rocket into
launcher until ejection pin is held in
