TM 9-1345-203-12
(2) Complete steps f(2) (8), above.
WARNING
(3) Affix bipod base assembly to bipod clip on
MINE SYSTEM IS NOW FULLY
forward portion of launcher immediately
ARMED AND WILL FIRE WHEN
behind taped plastic cover.
PRESSURE
IS
APPLIED
TO
(4) Generally aline launcher in direction of
DISCRIMINATOR. STAND CLEAR OF
target impact point and set firmly on bipod
FRONT AND REAR OF LAUNCHER
assembly. Force bipod spikes to take
advantage of whatever grip is available.
Allow forward end of launcher at least 5
g. Emplacement on Rock, Shale, etc.
inches clearance from ground.
(1) If rocky terrain or suitable mound cannot
be formed to support launcher, use bipod
assembly.
(6) Follow steps f(11) (15), above.
NOTE
(7) Fill dispenser pouch with whatever
A knurled, threaded assembly on
anchoring material (earth, rock, gravel,
bipod assembly allows for elevation
etc.) is available, to about 6 inches from
adjustment.
top to allow for tying. ill accessories
pouch so as to allow for easy closing.
(5) Support launcher by packing available
(8) Close both pouches.
earth, rock, gravel, etc., around sides of
(9) Follow steps f(18) (27), above.
launcher. Keep forward and aft ends of
launcher clear.
