TM 9-1345-203-12
Table 4-2. Inspection Criteria for Mines and Fuzes - Continued
Item
Acceptable
Reparable
Irreparable
Fuze well
Light corrosion on liner
Minor rust or corrosion which can be
Beyond repair due to extensive cor-
removed.
rosion and etching.
Damaged threads. Heavy rust on
Light rust which can be removed
threads
Markings
Correct and legible
Missing, illegible, incorrect or mislead-
Correct data cannot be determined.
ing, and correct data is available for
remarking.
Body
Free from corrosion.
None.
Extensive corrosion.
Free from cracks
None.
Cracks in metal parts.
Threads undamaged.
None.
Threads damaged.
Safety pin and
Safety pins in position.
None.
Safety pins not in position.
pull wire
Pull wire with light corrosion.
None.
Pull wire broken or heavily cor-
(when used)
roded.
Body marking
Minor cuts, scratches, and
None.
Severe cuts, tears, and dents.
dents.
Legible and correct.
Illegible, correct data available for
Correct data cannot be determined.
remarking.
Cracked bodies.
Body
Free from corrosion.
None.
Corroded.
Secondary
Free from corrosion.
None
Corrosion.
fuze wells
Marking
Legible and correct.
Illegible, correct data available for
Correct data cannot be determined.
remarking.
Extensive rust cannot be removed
Body
Free of rust
Minor rust which can be removed with
with wire brush, sandpaper, or
wire brush, sandpaper, or steel wool.
steel wool.
None
Dents less than 1/4 inch deep
Dents deeper than
1/3 inch.
None
No cracked, broken, or punc-
Cracked, broken, or
tured metal parts.
punctured metal parts.
Closure cap
No missing screws or rivets.
None.
Missing screws or rivets.
Connector
Free of damage.
None.
Cannot mate with connector in
launcher rack.
Arming Slider
Flush or below side of breech
None.
Not flush or above side of breech
housing.
housing.
Selector
Broken.
None.
Cannot include faults simulation.
Switch
Cleaning.
a.
Cleaning, Touch-Up, and Marking of
Mines and Mine Canisters
NOTE
WARNING
Rags will be stored in noncombustible self-
closing containers. Wastes or used rags will be
PRIMERS (FOR MINE FUZE) WILL BE
placed in water-filled containers. Areas will be
CLEANED ONLY WITH RAGS DAMP-
well ventilated where solvents and paints are
ENED WITH ALCOHOL OR ACETONE.
used.
4-4 Change 3
