TM 9-2330-213-14&P
This Task Covers:
Male Connector Repair
a. Identification Band Replacement
c.
Female Connector Repair
d.
b. Terminal Replacement
Initial Setup:
Materials/Parts:
Equipment Conditions:
Intervehicular cable disconnected from towing
Contacts (as required)
Identification bands (as required)
Tools/Test Equipment:
Terminals (as required)
General mechanics tool kit
Common No. 2 shop set
Electric etcher
a.
IDENTIFICATION BAND REPLACEMENT
Remove identification band (2) from wire lead
1.
(1) and discard.
2.
Mark new identification band (2) with proper
identification number.
Position new identification band (2) on wire lead
3.
(1) and bend tabs over wire lead.
b. TERMINAL REPLACEMENT
1.
Cut terminal (3) off wire lead (4) and discard.
2.
Strip insulation off wire lead (4) equal to depth
of new terminal (3).
Position new terminal (3) on wire lead (4).
3.
Crimp terminal.
_
TA505260