TM 9-2330-227-14&P
WALL RECEPTACLES AND BASE, 110-VOLT - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Put in place.
Elbow (3)
Base (1) and
11.
van body (2)
Screw in, and tighten using number two
Three screws (4)
12.
cross-tip screwdriver.
Screw in, and tighten using 3/16-inch
Two screws (5)
Elbow (4) and
13.
flat-tip screwdriver.
base (1)
Using ball-peen hammer, tap in place.
Elbow cover (6)
Base (1)
14.
a. Wrap wires (9) around screws (8).
Two contact
Wall
15.
b. Screw in, and tighten screws (8) using
screws (8) and
receptacle (7)
3/16-inch flat-tip screwdriver.
two wires (9)
Put in place.
Wall receptacle (7)
Base (1)
16.
and two wires (9)
Screw in one-quarter turn using
Screw (10)
Wall
17.
3/16-inch flat-tip screwdriver.
receptacle (7)
Tap in place using ball-peen hammer.
Two covers (11)
18.
4-34
