TM 9-2330-227-14&P
LIGHT SWITCHES, 24-AND 11O-VOLT - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL CONTINUED
Take off.
Plate (2)
2. Box (1)
Using 3/16-inch flat-tip screwdriver,
Two screws (4)
3. Switch (3)
unscrew and take off.
and box (1)
Pull out from box.
Switch (3) and
4. Box (1)
three wires (5)
NOTE
Tag wires to aid in installation (page 4-4). If circuit marker bands are missing or not
readable, replace (page 4-73).
Using 3/16-inch flat-tip screwdriver,
Three screws (6)
5. Switch (3)
unscrew part way.
Pull out.
Three wires (5)
6.
Take out.
Switch (3)
7. Box (1)
Using number two cross-tip screwdriver,
Four screws (8)
8. Van body (7)
unscrew and take off.
and box (1)
Take off.
Box (1)
9. Van body (7)
Using long round-nose pliers, pull off.
Grommet (9)
10. Box (1)
INSTALLATION
Push in place.
Grommet (9)
11.
Put in place, lining up holes.
Box (1)
12. Van body (7)
Screw in, and tighten using number two
Four screws (8)
13. Van body (7)
cross-tip screwdriver.
and box (1)
Put in place.
Three wires (5)
14. Switch (3)
Screw in, and tighten using 3/16-inch
Three screws (6)
15.
flat-tip screwdriver.
Put in place.
Switch (3) and
16. B OX (1)
wires (5)
4-36
