SERVICE TAILLIGHT ASSEMBLIES - CONTINUED
ACTION
REMARKS
LOCATION
ITEM
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT - CONTINUED
Door and lens
Place in position on service taillight
9. Service taillight
assembly (2)
body (1).
body (1)
Six captive
Using 3/16-inch flat-tip screwdriver,
10.
screws (3)
screw in.
If only repairing lamp, lens, or
door assembly, go to FOLLOW - ON
MAINTENANCE.
INSTALLATION
Service taillight
Place in position, and aline with screw
11. Frame (4)
assembly (5)
holes.
Two screws (6) and
Put in, and tighten using 9/16-inch
12. Frame (4) and
Iockwashers (7)
socket and ratchet handle with
service taillight
3/8-inch drive.
assembly (5)
Push together.
13. Wire harness (8)
Six connectors (9)
service taillight
assembly (5)
4-54