TM 9-2330-227-14&P
CONNECTOR RECEPTACLE REPAIR, 24-VOLT
This task covers:
Repair (page 5-9)
INITIAL SETUP
Materials/Parts - Continued
Tools
Flux, rosin (item 8, appendix E)
Pliers, diagonal cutting
Solder, non-acid (item 17, appendix E)
Screwdriver, flat-tip, 3/16-inch
Soldering iron, gun type
Personnel Required
Stripper, wire, hand
One
Materials/Parts
Equipment Condition
Alcohol, denatured (item 2,
24-voIt connector receptacle removed
Brush, acid swabbing (item 4,
ACTION
REMARKS
ITEM
LOCATION
REPAIR
NOTE
Tag wires to aid in installation (page 4-4). If circuit marker bands are missing or not
readable, replace (page 4-73).
Bushing retaining
Unscrew, and pull back.
1. Shell (1)
nut (2)
Using 3/16-inch flat-tip screwdriver,
Shell (1)
2. Bushing (3)
pry off.
12 inserts (4)
a. Using pliers, pull forward out of
3.
bushing (3).
