TM 9-2330-227-14&P
AXLE MAINTENANCE - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
Position on axle.
a.
Four U-bolts (4)
8. Axle (1) and
Using ball-peen hammer, tap through
b.
radius rod
spring seats (5) and radius rod
brackets (3)
brackets.
Eight nuts (6)
Screw on, and tighten using 17/16-inch
9. Four U-bolts (4)
socket and ratchet handle with 3/4-inch
and washers (7)
drive.
Take away trestles and dolly jacks.
Axle (1)
10.
FOLLOW-ON MAINTENANCE:
1. Install hydraulic tubes and fittings (page 4-108).
2. Install backing plates on both wheels (pages 4-92 and 4-95).
TASK ENDS HERE
TA231354
5-39
