TM 9-2330-227-14&P
BRAKESHOE ASSEMBLY REPAIR, ONE-CYLINDER BRAKE ASSEMBLY OPTION
This task covers:
INITIAL SETUP
Materials/Parts - Continued
Tools
Shim stock, as required
Brush, wire
Solvent, drycleaning, PD-680
Drift, brass, 3-inch
Gage, thickness, 0.002-inch (0.051-mm)
Press, arbor
Personnel Required
Reliner, brake
One
Materials/Parts
Equipment Condition
Bushing, brakeshoe
Mask, protective
Rivets, (16 required)
ACTION
REMARKS
ITEM
LOCATION
REPAIR
WARNING
Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of
vapors and avoid skin contact. Use only in well-ventilated area, and keep away from
open flame. Injury to personnel could occur.
Brake linings contain asbestos fibers. Protective mask must be worn while performing
maintenance on brake linings. Failure to do so could result in serious injury to
personnel.
Worn brake linings could result in injury or death to personnel. When brake linings are
worn to within 0.0625-inch (1.59 mm) of rivets, they must be replaced.
NOTE
There are four brakeshoes on semitrailer. This procedure is for one. Repeat for the
others.