TM 9-2330-247-14&P
4-23. COMPOSITE LIGHT ASSEMBLY (Con't)
ACTION
REMARKS
LOCATION
ITEM
Light body (9)
9.
Door and lens
Place in position on light body (9)
assembly (5)
10
Six captive
Screw in using 1/4 in. flat-tip screwdriver.
If repairing lamp, lens, or door assembly
screws (6)
only, go to FOLLOW-ON MAINTENANCE.
INSTALLATION
11.
Frame (4)
Place into position and aline with screw holes.
Composite light
assembly (11)
12.
Frame (4) and
Two screws (13) and
Screw in and tighten using 9/16 in. socket and
composite light
Iockwashers (12)
assembly (11)
13.
Eight connectors
Chassis wiring
a. Push together.
b. Put connectors (2) in harness clip (3).
(2)
harness leads
(1) and composite
light assembly (11)
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
SERVICE STOPLIGHT-TAILLIGHT ASSEMBLY
This Task Covers:
c.
Installation
a.
Removal
b. Lamp, Lens, and Door Assembly Replacement
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
Intervehicular cable disconnected from towing ve-
Screwdriver, flat-tip, 1/4 in.
Socket, 3/8 in. drive, 9/16 in.