TM 9-2330-247-14&P
4-24.
SERVICE STOPLIGHT-TAILLIGHT ASSEMBLY (Con't)
ACTION
ITEM
REMARKS
LOCATION
NOTE
Both service stoplight-taillight assemblies are replaced in the same way. This
procedure is for the right; repeat for the left.
If wire connectors are to be repaired or replaced, refer to chassis wiring harness task
Removal is not necessary for lamp, lens, or door assembly replacement. If replacing
lamp, lens, or door assembly only, go to step 4. If circuit marker bands are missing or
illegible, replace (para 4-26).
REMOVAL
1.
Harness clip (3)
Six connectors (2)
Pull out and take apart.
2.
Frame (4) and
Two screws (12)
Using 9/16 in. socket and ratchet handle with 3/8 in.
service stoplight-
and Iockwashers
drive, unscrew and take out.
taillight assembly (5)
(13)
Take off.
Frame (4)
Service stoplight-
3.
taillight assembly (5)
TA701050
4-20
