TM 9-2330-247-14&P
4-24.
SERVICE STOPLIGHT-TAILLIGHT ASSEMBLY (Con't)
ACTION
REMARKS
LOCATION
ITEM
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
4.
Stoplight-taillight
Using 1/4 in. flat-tip screwdriver, unscrew from stop-
Six captive
light-taillight body (6).
body (6)
screws (11)
Door and lens assembly (10) will come off
with captive screws (11).
Using 1/4 in. flat-tip screwdriver, pry out of groove,
Door and lens
Preformed
5.
only if damaged.
assembly (10)
packing (9)
Push in, turn 1/4 turn counterclockwise, and take out.
Three lamps (8)
Stoplight-taillight
6.
body (6)
Place in proper socket (7), push in, and turn 1/4 turn
Three lamps (8)
7.
clockwise.
Place in groove.
Door and lens
Preformed
8.
assembly (10)
packing (9)
Place in position.
Door and lens
Stoplight-taillight
9.
body (6)
assembly (10)
Using 1/4 in. flat-tip screwdriver, screw in.
Six captive
10.
If repairing lamp, lens, or door assembly
screws (11)
only, go to FOLLOW-ON MAINTENANCE.
INSTALLATION
Frame (4)
Place into position and aline with screw holes.
11.
Service stoplight-
taillight assembly (5)
Install and tighten using 9/16 in. socket and ratchet
12.
Frame (4) and
Two screws (12)
handle with 3/8 in. drive.
service stoplight-
and
taillight assembly (5)
Iockwashers (13)
a. Push together.
Six connectors (2)
13.
Chassis wiring
b. Put connectors (2) in harness clip (3).
harness leads (1) and
service stoplight-
taillight assembly (5)
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
4-21