TM 9-2330-285-14&P/TO 36A11-21-10-1
STEERING KNUCKLES
This task covers:
a. Removal (page 4-69)
b. Installation (page 4-72)
INITIAL SETUP
Tools - Continued
Tools
Socket, 9/16-inch by 1/2-inch drive
Hammer
3/4-inch wrench
5/32-inch socket head wrench
7/16-inch wrench
Tie rod separator
Cutting pliers
Materials/Parts
Punch
9/16-inch wrench
New cotter pin
Ratchet handle, 1/2-inch drive
1/2-inch wrench
Equipment Condition
5/8-inch wrench
Hub and brake drum removed
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Procedure is for the removal of one knuckle. The procedure
for both sides is identical.
a. Snap out clip using a flat-tip
1 Front axle
Hydraulic tube
screwdriver.
(1), brake hose
b. Take tube (1) out of hose (2) using 5/8-
(2) and clip (3)
inch and 7/16-inch wrenches.
