TM 9-2330-294-14
(4) Unscrew adjusting bolt from actuator. Pry
adjusting bolt seal assembly loose from housing and
remove seal assembly and actuator. Remove seal
assembly from actuator.
(5) Remove adjusting plunger from housing.
(1) Remove anchor plunger guide and gasket
from plunger housing.
(2) Remove guide assembly, gasket and spring
from plunger housing. Use a small magnet to remove
adjusting pawl.
(3) Pry anchor plunger seal assembly loose from
through 200 ).
housing and remove seal assembly and plunger.
Remove seal assembly from anchor plunger.