TM 9-2330-294-14
Special
Tools
and
Equipment
Fig. No.
Para No.
6-7
5-1
5-13f,
5-1
5-14f,
5-15b.
Section II. TROUBLESHOOTING
may occur, nor all tests or inspections and corrective
actions. If a malfunction is not listed or is not
a. This section contains troubleshooting in-
corrected by listed corrective actions, notify your
formation for locating and correcting most of the
supervisor.
operating troubles which may develop in the
semitrailer. Each malfunction for an individual
5-6. Troubleshooting Table
component, unit, or system is followed by a list of
Information in table 5-2 is for use in conjunction
tests or inspections which will help you to determine
with and as a supplement to the troubleshooting
probable causes and corrective actions to take. You
information available to organizational maintenance
should perform the tests/inspections and corrective
actions in the order listed.
b. This manual cannot list all malfunctions that
Section III. GENERAL MAINTENANCE
and installed to comprise a complete major
assembly.
a. In disassembly, remove as many major
c. Complete disassembly of a component is not
components and subassemblies as required for in-
always required to make repairs or replacements.
dicated repair. Subassemblies are further reduced, as
Good judgement should be used to keep disassembly
required, into individual parts.
operations to a minimum.
b. During assembly, subassemblies should be
assembled first, combined into major components
Troubleshooting
ELECTRICAL SYSTEM
1. ONE OR MORE LAMPS FAIL TO LIGHT
Step 1. Make short circuit test (para 4-156 ).