TM 9-2330-356-14
Wear protective clothing (goggles and
gloves) and use caution to avoid injury to
personnel.
f . Remove the rain cap and clean with compressed
air.
Replace baffle in end cap.
g.
h.
Clean filter element. After six cleanings or
annually, have unit maintenance obtain a replacement
filter element.
Install new or cleaned filter element in air
i.
cleaner body. Fasten in place with washer and wingnut.
Replace filter end cap. Ensure that the portion of
j.
the end cap marked TOP is at the top. Secure end cap by
tightening clamp.
b.
To service the filter, loosen clamp (fig. 3-33) and
remove end cap.
CAUTION
Never run engine with filter or dust collector
removed. Damage to engine could result.
c.
Unscrew the wingnut and washer and remove the
element.
d.
Remove baffle from end cap and remove any
accumulated dirt.
e.
Use a clean rag to wipe clean the interior of air
cleaner and end cap.
WARNING
Compressed air used for drying or cleaning
purposes must not exceed 30 psi (207 kpa).
3-40
