TM 9-2330-356-14
come dizzy while using cleaning solvent,
Installation.
c.
immediately get fresh air and medical help.
If solvent contacts eyes, Immediately wash
hose.
your eyes with water and get medical aid.
Compressed air used for drying or
(2) Install nozzle into coupler and release ring.
cleaning purposes must not exceed 30 psi
(207 kPa). Wear protective clothing
(3) Check for proper connection by trying to pull
(goggles and gloves) and use caution to
the nozzle by hand from the hose.
avoid injury to personnel.
3-16. Closed-Clrcult Nozzle (M970 and M970A1)
(3) Clean screen in dry cleaning solvent (item 11,
a. Service. The screen in the nozzle must be cleaned
periodically and whenever flow is restricted through
material and to dry the screen.
nozzle.
Removal.
b.
hose.
unscrew screen from nozzle.
(2) Pull nozzle from hose.
c. Installation.
hose.
(2) Install nozzle into coupler and release ring.
(3) Check for proper connection by trying to pull,
by hand, the nozzle from the hose.
Closed-Circuit Nozzle.
WARNING
Dry cleaning solvent P-D-680 is toxic and
Always wear protective
flammable.
goggles and gloves, and use only In a well-
ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe va-
pors. DO NOT use near open flame or ex-
cessive heat. The solvent's flash point is
100F-138F (38C-59C). If you be-