Figure 4-99. Tool Box

TM 9-2330-356-14

4-58. Tool Box (Fig. 4-99)

Replacement.

NOTE

On some semitrailers, tool box may be tack

welded in position. Break weld with a cold

chisel to remove tool box. Do not reweld

when installing tool box.

(1) Remove tool box contents and set aside.

(2) Place a support under tool box to support it

when mounting screws are removed.

(3) Disconnect the emergency valve control (1,

fig. 4-99) by removing capscrew (2) and nut (3).

TA099838

Figure 4-98. Mudflap Modification.

(4) Remove two capscrews (4) and nuts (5).

TA099839

Figure 4-99. Tool Box.