TM 9-2330-356-14
TA502359
(4) Install vent cap and tighten securely using a
(1) Ensure that grounding studs are installed to
pipe wrench.
clean, unpainted metal surfaces. If mounting surface is
painted, scrape off paint to bare metal.
b. Grounding Studs.
(2) Tighten grounding stud mounting hardware
securely to ensure a good grounding contact.
NOTE
(3) Check to ensure that International Ground-
For location of all grounding studs, refer to
ing Symbol
and DO NOT PAINT GND STUD sten-
figures 1-1 through 1-11.
cils are present and legible.
4-117
