TM 9-2330-356-14
Figure 5-7. Engine and Pump Assembly InstaIled on Semitrailer.
(9) Remove four locknuts and capscrews
(fig. 5-8) which secure rear cross
brace to
engine frame.
Remove six locknuts and capscrews which fasten the
support bracket for the engine frame to the tank frame
near front of semitrailer. The support bracket should
remain on the engine frame.
(10) Position lift truck forks under engine frame to
take up the weight of the engine module. Remove
locknuts and capscrews which fasten engine module to
tank. Slowly remove module by backing the lift truck
straight away from the semitrailer.
b.
Installation.
(1) Move pump and engine module into position
with forklift truck. Attach engine frame to semitrailer with
capscrews and locknuts.
semitrailer frame with six capscrews and locknuts. Attach
rear cross brace to engine frame with four capscrews and
locknuts. Tighten all nuts. Remove forklift truck.