TM 9-2330-356-14
d. Remove cotter pin (5), and remove throttle rod
Governor Linkage (Fig. 7-1 4)
(7) and two washers (20) from control arm (19).
Disconnect governor linkage (1) from injector
a.
e. Remove bracket (12) from engine back plate by
pump (2) and governor arm (3).
removing two screws (13), lockwashers (14), and nuts (15).
Remove spring (17) and disconnect governor arm
(3) from governor shaft (4).
Tag and remove injector nozzle return lines (3).
a.
Remove manifold (4) and return line (5).
b.
Remove cotter pin (8) and clevis pin (9), and
c.
Tag and remove injector lines (7).
disconnect yoke (10) from throttle rod (7).
