TM 9-2330-356-14
Remove engine shroud panel.
a.
Remove the two screws fastening the solenoid to
b.
the bottom cylinder pan. Remove solenoid.
Remove electrical lead to control.
c.
a. Remove the
fuel filter adapter (1, fig. 7-18) and
fuel filters (2) as an assembly by removing three capscrews
(3) and lockwashers (4). Lower assembly enough to expose
b.
that secure filler tube (3) to engine block.
c. Remove filler tube (3) and gasket (4). Discard
gasket.
Engine Junction Box and Electrical Wiring
a.
b.
c.
d.
capscrews (2) and washers (3) attaching exhaust manifold
(4) to cylinder heads. Remove manifold and four gaskets
(5).