TM 9-2330-371 -14&P
BRAKESHOES
This task covers:
c. Installation (page 4-68)
a. Removal (page 4-66)
b. Inspection and cleaning (page 4-67)
INITIAL SETUP
Personnel Required
Tools
One
Hammer, hand
Handle, socket, 3/8-inch drive
Equipment Condition
Pliers, brake spring
Pliers, slip-joint
Hub and drum removed (page 4-1 13).
Pliers, straight-jaw
Air reservoir drained (page 3-9).
Screwdriver, flat-tip
Socket, 7/16-inch, deep well
Materials/Parts
Brush (item 3, appendix E)
Solvent ,drycleaning PD-680
(item 16, appendix E)
ACTION
ITEM
LOCATION
REMARKS
REMOVAL
WARNING
Brake linings contain asbestos fibers. Protective
mask must be worn while performing this task,
Failure to do so could result in serious injury to
personnel.
Two C-washers (2)
1.
Two anchor
a. Using screwdriver and hammer,
pins (1)
and strap (3)
take off washers (2).
b. Take off strap (3).
Two retract
Brake retract
2.
Using brake spring pliers, take off.
spring (5)
spring pins (4)
Two brake
Two nuts (7), two
Using 7/16-inch deep well socket and
3.
guide pins (6)
springs (8), and
handle, unscrew and take off.
four cap washers (9)
