TM 9-2330-371-14&P
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
NOTE
Be sure leg is securely supported before unbolting
from frame.
Eight nuts (3), 16
Using 15/16-inch socket, handle, and
Right leg (1) and
13.
washers (4) and
15/16-inch wrench, unscrew and take out.
frame (2)
eight screws (5)
Right leg (1)
With aid of assistant, pull off.
Frame (2)
14.
Nut (7), washer (8),
Using 9/16-inch socket, handle, and 9/16-
Right leg (1) and
15.
inch wrench, unscrew and take out.
and screw (9)
rod coupling (6)
Rod coupling (6)
Pull off.
Right leg (1)
16.
INSTALLATION
Rod coupling (6)
Push on and line up holes.
17.
Nut (7), washer (8),
Put in and tighten using 9/16-inch socket,
Right leg (1) and
18.
and screw (9)
handIe, and 9/16-inch wrench.
rod coupling (6)
Right leg (1)
Put in position and line up holes.
Frame (2)
19.
Eight nuts (3), 16
Put in and tighten using 15/16-inch
Frame (2) and
20.
washers (4), and
socket, handle, and 15/16-inch wrench.
right leg (1)
eight screws (5)
U-bolt (10) and two
Put on and tighten using 7/8-inch wrench.
Right leg (1)
21.
nuts(n)
Gearbox (12)
Put on shaft (13) and lineup holes (14).
22.
Four nuts (15),
Put in and tighten using 15/16-inch
Gearbox (12) and
23.
eight washers (16),
socket, handle, and 15/16-inch wrench.
right leg (1)
If replacing gearbox only, task ends
and four screws (17)
here.
Line up holes of coupling (18)
Screw (19), washer
a.
Coupling (18)
24.
(20) and nut (21)
and shaft (13).
Put in and tighten screw (19), washer
b.
(20) and nut (21) using 9/16-inch
wrench and 9/16-inch socket with