TM 9-2330-371-14&P
LANDING GEARSHOE
This task covers:
INITIAL SETUP
Tools
Personnel Required
Hammer, hand
One
Pliers, slip-joint
Punch, drive-pin, l/4-inch
Equipment Condition
diameter, brass
Semitrailer kingpin coupled to towing
Materials/Parts
vehicle.
Spring pin (two required per leg)
ACTION
ITEM
LOCATION
REMARKS
REMOVAL
NOTE
If towing vehicle is not available, place secure
blocking under front of semitrailer frame. Raise legs
until semitrailer front rests on blocking and pressure
is off of shoe to be removed.
Wheel chocks (2)
Semitrailer (1)
Place between outside tandem wheels (3)
1.
on both sides of semitrailer.
Two spring
Ends of
2.
Using punch and hammer, drive out.
pins (5)
axle (4)
Discard spring pins (5).