TM 9-2330-371-14&P
LANDING GEARSHOE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL-CONTINUED
Pull out and take shoe (4) off.
Two flat washers
Leg (1)
3.
It may be necessary to use a hammer
(2), axle (3) and
and brass drive pin.
shoe (4)
INSTALLATION
Place on bottom of leg (1) and aline
Shoe (4)
Leg (1)
4.
holes.
Push into place.
Axle (3)
Shoe (4)
5.
It may be necessary to use a hammer.
to leg (1)
Put one on each end of axle (3).
Two washers (2)
Axle (3)
6.
Tap one into hole in each end of axle (3)
Two new spring
7.
using pliers to squeeze pin, and hammer.
pins (5)
If towing vehicle was used, uncouple tow-
Front of
8.
ing vehicle. If blocks were used, lower
semitrailer (6)
legs until weight is off blocks, then re-
move blocks.
Take out from between wheels (8) and stow.
Wheel chocks (7)
9.
TASK ENDS HERE
TA224296