TM 9-2330-371-14&P
LANDING GEAR CRANK AND CRANK HOLDER
This task covers:
a. Removal (page 4-127)
b. Installation (page 4-128)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 1/2-inch drive
One
Socket, 15/16-inch, 1/2-inch drive
Socket, 9/16-inch, 1/2-inch drive
Wrench, 15/16-inch, box-end
Wrench, 9/16-inch, box-end
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Handcrank (1)
Nut (3), two
Using 9/16-inch socket, handle, and
and gearbox (2)
washers (4), and
9/16-inch wrench, unscrew and take out.
capscrew (5)
2.
Handcrank (1)
Take out.
3.
Crank holder (6)
Nut (8) and
Using 15/16-inch socket, handle, and
and landing gear
washer (9)
15/16-inch wrench, unscrew and take out.
leg (7)
4.
Landing gear
Capscrew (10),
Take out.
leg (7)
washer (11), and
crank holder (6)
