TM 9-2330-371-14&P
SPLASH GUARDS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
Place on rear of deck crossbeam (1) and
Splash guard (2)
Crossbeam (1)
3.
aline bolt holes.
and retainer (3)
Screw in and tighten using 9/16-inch
Four capscrews (4),
Splash guard (2)
4.
socket, handle, and wrench.
flat washers (5),
to deck cross-
beam (1)
and nuts (7)
TASK ENDS HERE
SPLASH SHIELDS
This task covers:
INITIAL SETUP
Tools Continued
Tools
C-clamps (2)
Tape, measuring
Chisel, cold
Wrench, 9/16-inch, open-end
Grinder, portable
Hammer, hand
Personnel Required
Socket, 9/16-inch, 3/8-inch drive
Two
Welder, arc
TA224300