TM 9-2330-371-14&P
U-BOLTS, SADDLE, AND SPRING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Forward rear axle
Dual tire/wheel
Block in front and behind to prevent
(1) and rear axle
assemblies (3)
movement of bogie assembly.
(2) assemblies
2.
Bogie assembly
Hydraulic dolly
a.
Position under center of trunnion
jack (4)
cross tube (5).
b.
Raise until weight of trunnion cross
tube (5) is supported.
Do not raise wheels (3) off the
ground.
TWO U-bolts (6)
3.
Four hex nuts (8)
Using 1 7/16-inch socket and handle, un-
to spring seat (7)
and washers (9)
screw and take off.
4.
Spring
Two U-bolts (6) and
Take off.
assembly (10)
saddle (11)
It maybe necessary to free U-bolts
(6) by striking them with a soft
heavy hammer.
5.
Axles (1) and (2)
a. Chain axles (1) and (2) together so they
do not rotate after torque rods are
removed.
b. Remove lower torque rods (page 5-42).
TA224329
