TM 9-2330-373-14 & P
4-19.
BRAKE RETRACTION SPRING
THIS TASK COVERS
a. Removal
Troubleshooting Reference
b. Inspection
Item No.
c. Installation
5
Brakes will not release
7
Slow brake application
or slow release
9
Brake drum running hot
Test Equipment Required:
None
Personnel Required:
1
REMOVAL
1.
Heed WARNING on page 4-50 and open air
reservoir drain cock.
2.
Remove wheel from hub (para 3-7).
3.
Remove hub and brake drum from axle
assembly (para 4-30).
4.
Remove brake retraction spring from each brake
shoe spring pin.
INSPECTION
1.
Inspect spring for rust, tension and excess wear.
2.
Replace worn or defective spring.
INSTALLATION
1.
Insert spring in position on spring pin.
2.
Install hub and brake drum on axle (para 4-30).
3.
Install wheel on hub (para 3-7).
4.
Bleed and adjust brakes (paras 4-18 and 4-17).
TA 314775
4-54
