TM 9-2330-373-14 & P
4-21.
HYDRAULIC WHEEL CYLINDER (cont)
INSTALLATION (cont)
3. If installing both cylinders, attach cylinder tubes
(12) and (14) to tube fittings (13) and tube
connectors (9).
4. Install spacer rings (10) on fluid passage bolts
(11) and insert bolts into tube connectors (9).
5. Install washers (8) on bolts (11). Position
assembled tubes (12) and (14) with assembled
parts, on backing plate (5). Tighten bolts (11).
5.
Backing plate
8.
Washer
9.
Connector
10.
Spacer ring
11.
Bolt
12.
Tube
13.
Fitting
14.
Tube
6.
Install hub and drum assembly (para 4-30).
7.
Install wheel (para 3-7).
8.
Bleed and adjust brakes (paras 4-18 and 4-17).
4-22.
BRAKE BACKING PLATE AND SUPPORT AND ADJUSTER ASSEMBLY
THIS TASK COVERS
a. Removal
b. Inspection and repair
c. Installation
Test Equipment Required:
None
Personnel Required:
1
TA 314780
4-59
