TM9-2330-374-14&P
Loosen two captive screws (4)
(2) P u l l r e c e p t a c l e ( 2 ) f r o m w i r e r u n ( 3 ) .
s e c u r i n g t w o w i r e s ( 5 ) . R e m o v e receptacle (2) f r o m w i r e r u n ( 3 ) .
D i s c o n n e c t i n g or connecting wires
Unlocking or locking receptacle
1 1 0 volt wall receptacle replacement
Installation.
b.
(1) Connect two wires (5, figure 4-2) to receptacle (2). Secure with two
c a p t i v e screws (4) .
(2) Place receptacle (2) in wire run (3) opening. Lock in place by turning
locking screw (1) one quarter turn.
INITIAL SETUP
Tools
General mechanics tool kit
Materials/Parts
12 volt taillight assembly
NOTE
If wire connectors
Tag wires to aid in installation.
a r e to be repaired or replaced, go to wire connector
procedure (para. 4-28).
R e m o v a l is not necessary for lamp, lens, or door
If circuit marker bands are
a s s e m b l y replacement.
missing or not readable, replace (para. 4-28).
