TM 9-2330-381-14
5-23.
GOOSENECK CYLINDER (CONT)
WARNING
Hydraulic fluid may be absorbed through the skin. Wear long sleeves, gloves, and
goggles or face shield. If hydraulic fluid gets into the eyes, flush them immediately
with water and seek medical attention. If hydraulic fluid gets on skin, wash
thoroughly with soap and water. Wash hands thoroughly prior to eating or
smoking.
REMOVAL
1.
Start APU (para 2-16).
2.
Pull out handle of suspension shut-off valve to ADJUST position (para. 2-6). Be sure handle of gooseneck
isolation valve is in ADJUST position (para. 2-18).
NOTE
When gooseneck is lowered onto gooseneck support, both gooseneck cylinders
should be almost completely extended to accommodate removal of the upper
cylinder pin mounting hardware.
3.
Lower gooseneck (1) onto gooseneck support approximately 37 inches (94 cm) high (para. 2-18). Shut down
APU (para. 2-16).
5-106
