TM 9-2330-383-14&P
3-4.
OPERATOR TROUBLESHOOTING TABLE (CONT)
Table 3-1. Operator Troubleshooting Table - CONT
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BRAKES - CONT
3. HARD PULLING.
Check for cross connected air hoses.
a.
If air hoses are cross connected, connect properly.
b.
If air hoses are connected properly, notify unit maintenance.
TIRES
EXCESSIVELY WORN OR SCUFFED TIRES OR FLAT SPOTS ON TIRES.
Step 1.
Check tire pressure. For bias ply tires, tire pressure should be 100
psi for highway and 65 psi for off-road. For radial tires, tire
pressure should be 105 psi.
a.
If tire pressure is low, inflate tires to correct tire
pressure.
b.
If tire pressure is correct, proceed to step 2.
Step 2.
Check for loose wheel nuts.
If wheel nuts are loose, tighten nuts and have unit maintenance
Step 3.
Check suspension system for damaged air bags and loose or missing
bolts and nuts.
a.
If air suspension system is damaged or has loose or missing
bolts and nuts, notify unit maintenance.
b.
If suspension system is not damaged and all hardware is
complete and secure, and problem still exists, notify unit
maintenance.
Change 1