TM 9-2330-383-14&P
b. Uncaging.
NOTE
Uncaging the brake air chamber applies only to rear brakes.
(1)
Loosen nut (3) on release stud (5) to uncage springs until wheel no
longer spins.
(2)
Turn release stud (5) one-quarter turn counterclockwise and remove
release stud (5).
CAUTION
Caging nut must be next to the tire bolt head facing rear (curbside) to
prevent rubbing air bag.
(3)
Install stud (5) on bracket with washer (4) and nut (3).
(4)
Install plug (7) on brake air chamber (6).
END OF TASK
Change 1